partition plate calculation

  https://3d-labs.com/product/partition-plate-calculation/

download partition plate calculation

partition plate design

This calculation the minimum pass partition plate thickness,table value, pressure drop across the plate,

 code allowable stress in tension at design metal temperature and plate dimension are considered during calculation.

pig launcher asme b 31.4 calculation

 https://3d-labs.com/product/pig-launcher-asme-b-31-4-design/

download pig launcher asme b 31.4 calculation

pig launcher asme b 31.4 design

The pig launchers and receivers were designed for a coal-bed methane gas production facility in Colorado.

 They are equipped with an integral safety locking system which works on the principle of mechanical key

 interlocking (transfer of keys). This system avoids serious injuries from human error and insures safety of personnel.

pipe thickness asme b 31.8 design calculation

  https://3d-labs.com/product/pipe-thickness-asme-b-31-8-design/

download pipe thickness asme b 31.8 design calculation

pipe thickness asme b 31.8 design

ASME B31.8 is often used as the design standard for natural gas piping systems in several facilities, 

such as compressor stations, gas processing facilities, metering stations, storage tanks and gas transporting pipeline.

 The design pressure for steel gas piping systems or the nominal wall thickness for a given design pressure shall be determined. 

This is the wall thickness computed using an applicable equation such as those stated in paragraph 841.1.1 of ASME B31.8

 or any other applicable code. The nominal wall thickness computed may be used to order the pipe with 

or without allowance to compensate for under thickness.

pipe thickness calculation TD13 design

 https://3d-labs.com/product/pipe-thickness-calculation-td13-design/

download pipe thickness calculation TD13 design

pipe thickness TD13 design

ASME TD13 is often used as the design standard for natural gas piping systems in several facilities, such as compressor stations,

 gas processing facilities, metering stations, storage tanks and gas transporting pipeline. The design pressure for steel gas piping 

systems or the nominal wall thickness for a given design pressure shall be determined.

pipe wall thickness design calculation

 https://3d-labs.com/product/pipe-wall-thickness-design/

download pipe wall thickness design calculation

pipe wall thickness design

The design standard for natural gas piping systems in several facilities, such as compressor stations, 

gas processing facilities, metering stations, storage tanks and gas transporting pipeline. The design 

pressure for steel gas piping systems or the nominal wall thickness for a given design pressure shall be determined.

slug force design calculation

  https://3d-labs.com/product/slug-force-design/

download slug force design calculation

slug force design

Slug force is equal to the change in momentum with respect to time. While performing slug flow 

analysis the following two assumptions are made It is assumed that the slug is formed across the 

full cross-section of the pipe for the maximum impact.

spreader beam calculation

  https://3d-labs.com/product/spreader-beam-design/

download spreader beam calculation

spreader beam design

In these calculations, we will explore the design of a basic spreader beam and see what design checks are 

needed to establish the suitability of a spreader beam for particular lifting operation.